PU WATERPROOF COATING
Main Property
ü The emulsion is an excellent one part Polyurethane Material with excellent elastic waterproof performance.
ü Mainly be used as waterproof coating material, sealing glue, etc.
Applications
Planar Bonding and Sealing:
ü Excellent bonding, sealing and repairing of various kinds of materials, such as concrete building, wood, metal, PVC, ceramics, carbon fiber, glass, etc.
Planar Waterproofing:
ü Waterproofing and moisture proofing for kitchen, bathroom, balcony,roof and so on.
ü Anti-seepage of reservoir, water tower, water tank, swimming pool, bath,fountain pool, sewage treatment pool and drainage irrigation channel.
ü Leak-proofing and anti-corrosion for ventilated basement, underground tunnel, deep well and underground pipe and so on.
ü Bonding and moisture proofing of all kinds of tiles, marble, wood,asbestos and so on.
Technical Data
PROPERTY | STANDARD/UNITS | VALUE |
Color/state | Liquid | Black |
Density | Gr/cc | 1.30±0.5 |
Surface Drying time | Hr | 6-8 |
Curing speed | mm/ 24hrs | 3~5 |
Tensile Strength | MPa | >1.5 |
Elongation at break | % | >600 |
Solid Content | % | >90 |
Operation Temperature | °C | 5-35°C |
Service Temperature | °C | -40~+120°C |
Shelf life | month | 6 |
Note：The above data are obtained by testing the material after curing for 7 days under certain conditions
UV- RESISTANCE MS WATERPROOF COATING
Technical Data Sheet
PROPERTY | MS WATERPROOF COATING |
Color | White,Grey |
Density (g/cm³) | 1.35±0.1 |
Surface Drying Time (Min) | ＜90 |
Tensile Strength (Mpa) | ＞0.2 |
Curing Speed (mm/24h) | 3 ～5 |
Elongation at Break (%) | ＞450 |
Solid Content (%) | ＞98 |
Operation Temperature ( ℃) | 5-35 ℃ |
Service Temperature ( ℃) | -40~+120 ℃ |
Shelf Life (Month) | 9 |
Note: All data above were tested under standard condition. | |
Applications
Ø Waterproofing and moisture proofing for kitchen, bathroom, balcony, roof and so on.Ø Anti-seepage of reservoir, water tower, water tank, swimming pool, bath, fountain pool, sewage treatment pool and drainage irrigation channel.
Ø Leak-proofing and anti-corrosion for ventilated basement, underground tunnel, deep well and underground pipe and so on.
Ø Bonding and moisture proofing of all kinds of tiles, marble, wood, asbestos and so on.
UV- RESISTANCE SA WATERPROOF COATING
Technical Data Sheet
PROPERTY | SA |
Color | White,Grey |
Density (g/cm³) | 1.3±0.1 |
Surface Drying Time (Min) | ＜120 |
Tensile Strength (Mpa) | ＞0.2 |
Elongation at Break (%) | ＞150 |
Solid Content (%) | ＞99 |
Operation Temperature ( ℃) | 5-35 ℃ |
Service Temperature ( ℃) | -40~+120 ℃ |
Shelf Life (Month) | 12 |
Note: All data above were tested under standard condition. | |
SELF LEVELING PU JOINT SEALANT
Technical Data
PROPERTY | PU160A | PU160B | PU160C |
Appearance | Grey semifluid | Grey semifluid | Black semifluid |
Density (g/cm³) | 1.35±0.1 | 1.35±0.1 | 1.35±0.1 |
Tack Free Time (Hr) | 2.5 | 3 | 4 |
Adhesion Elongation | ≥600 | ≥550 | ≥500 |
Hardness (Shore A) | 15-20 | 10-15 | 10-15 |
Resilience Rate (%) | ≥115
| ≥110
| ≥100
|
Curing Speed (mm/24h) | 3 ～ 5 | 3 ～ 5 | 3 ～ 5 |
Elongation at Break (%) | ≥1000 | ≥800 | ≥500 |
Solid Content (%) | ≥90 | ≥90 | ≥90 |
Operation Temperature ( ℃) | 5-35 ℃ | 5-35 ℃ | 5-35 ℃ |
Service Temperature ( ℃) | -40~+80 ℃ | -40~+80 ℃ | -40~+80 ℃ |
Shelf Life (Month) | 9 | 9 | 9 |
Implementation of standards: JT/T589-2004 | |||
Note：The above data are obtained by testing the material after curing for 7 days under certain conditions
Applications
Ø Bonding and sealing for the gap of joints of road, airport runway, square, wall pipe, wharf, roof, underground garage and basement.
Ø Sealing for leakage of oil refinery and chemical plant.
Ø Bonding and sealing for industrial floor, such as epoxy floor and all kinds of paint surface.
Ø Excellent bonding, sealing and repairing of various kinds of materials, such as concrete building, wood, metal, PVC, ceramics, carbon fiber, glass, etc
CONSTRUCTION Polyurethane Sealant
Technical Data
PROPERTY | PU120A | PU120B |
Appearance | Black/White/Grey Paste | Black/White/Grey Paste |
Density (g/cm³) | 1.35±0.5 | 1.35±0.5 |
Tack Free Time (Min) | 60-180 | 60-180 |
Elongation at break | ≥600 | ≥500 |
Hardness (Shore A) | 25±5 | 40±5 |
Extrusion rate (ml/min) | ≥60 | ≥50 |
Curing Speed (mm/24h) | 3 ～ 5 | 3 ～ 5 |
Tensile modulus | ≤0.4
| ≥0.4 |
Volatile content | ≥96 | ≥96 |
Operation Temperature ( ℃) | 5-35 ℃ | 5-35 ℃ |
Service Temperature ( ℃) | -40~+80 ℃ | -40~+80 ℃ |
Shelf Life (Month) | 9 | 9 |
Note：The above data are obtained by testing the material after curing for 7 days under certain conditions
Applications
ü Sealing of expansion and settlement joint of house building, plaza, road, airport runway, anti-wall, bridges and tunnels, building doors and windows etc.
ü Sealing of upstream face crack of drainage pipeline, drains, reservoirs, sewage pipes, tanks, silos etc.
ü Sealing of through holes on various wall and at floor concrete
ü Sealing of joints of prefab, side fascia, stone and color steel plate, epoxy floor etc.
ü Water-proof sealing in Airport runway, bridge and tunnel joints, drainage pipe, etc.
ü Bonding and sealing of concrete prefab, side fascia, stone and color steel plate.
ü Bonding and sealing of dale such as metal plates, wood board, plaster tablet and so on.
ü Excellent bonding, sealing and repairing of various kinds of materials, such as concrete building, wood, metal, PVC, ceramics, carbon fiber, glass, etc.
Waterproof Tape
Waterproof tape is an environment-friendly solvent-free sealing adhesive material, produced by blending butyl rubber with polyisobutylene and other raw materials.
Product features
(1) Excellent mechanical properties: high bonding strength and tensile strength, good elasticity and elongation, and strong adaptability to interface deformation and cracking.
(2) Stable chemical properties: excellent chemical resistance, weather resistance and corrosion resistance.
(3) Reliable application performance: it has good adhesion, waterproof, sealing, low temperature resistance and follow-up, and good dimensional stability.
(4) Operation is easy
Scope of application
(1) Roof waterproofing, underground waterproofing, waterproof treatment of structural construction joints and lap sealing of polymer waterproof coiled materials for new projects.
(2) Sealing and waterproof treatment of construction joints of subway tunnel structure in municipal engineering.
(3) Airtight, waterproof and shock absorption at the joint of color profiled plate. Airtight, waterproof and shock absorption of joints in sunshine board project.
(4) Bonding and sealing treatment in automobile assembly
(5) Waterproof sealing treatment of joints in steel structure construction.
(6) Butyl adhesive tape of composite aluminum foil is suitable for waterproof sealing of various civil roofs, color steel, steel structures, waterproof coiled materials, PC boards, etc. under sunlight.
Size Data
Thickness（mm） | Width（cm） | Length（m） | Quantity Per Box （Roll） | Box Size（cm） | Net Weight Per Box |
1 | 5 | 5 | 36 | 37*37*22 | 15 |
1 | 5 | 5 | 54 | 37*37*32 | 23 |
1 | 5 | 10 | 30 | 37*37*32 | 26 |
1 | 5 | 10 | 20 | 37*37*22 | 17 |
1 | 10 | 5 | 18 | 37*37*22 | 15 |
1 | 10 | 5 | 27 | 37*37*32 | 23 |
1 | 10 | 10 | 15 | 37*37*32 | 26 |
1 | 10 | 10 | 10 | 37*37*22 | 17 |
1 | 15 | 5 | 18 | 37*37*32 | 11 |
1 | 15 | 5 | 18 | 37*37*32 | 23 |
1 | 15 | 10 | 10 | 37*37*32 | 26 |
1 | 20 | 5 | 9 | 37*37*22 | 15 |
1 | 20 | 10 | 5 | 37*37*22 | 17 |
Insulating Glass Hot Melt Butyl Sealant
1. Very low moisture vapor transmission rates (MVTR) and gas permeability rates.
2. Properly constructed dualseal units incorporating the PIB butyl sealant will retain argon insulating gas and maintain a dry interior unit airspace for decades.
3. Butyl rubberable to be used with most commercially available silicone,polysulphide or butyl hot melt insulating glass secondary
sealants.
4. Wide service temperature, good extrusion process.
5. Without any smell
Product features
(1) 100% solid content.
(2) Hot melt, High quality.
(3) Based on polyisobutylene for insulating glass .
(4) It is one-part, non-solvent ,non-vulcanized.
(5) It keeps plastic and sealing over a wide temperature range and not crack and harden for sealant surface.
(6) It has good adhesion to glass, aluminum alloy, zinc plating steel, stainless steel and etc.
It could form an excellent humid proof system with elastic sealant.
Colored Two-component Polyurethane Anti-slip Coating for Road
Product Description
It is environmental two-component polyurethane adhesive material.
Colored and suitable for anti-skid pavement and colored stone permeable pavement.
After curing, it has high strength, high toughness and strong adhesion.
It can be directly bonded on the surface of asphalt, concrete, iron plate, wood board and other materials with high extensibility, good flame retardancy, strong corrosion resistance, oil stain resistance.
Key Features
1. Good anti-skid performance
It can significantly increase the dry and anti-sliding performance of the road surface in rainy days, and shorten the braking distance by more than 40%
2. Various colors are available, bright and lasting
The non-slip aggregate is made of many kinds of color and never-fading colored ceramic particles, which can ensure bright color and durable.
3. Thickness 2-5mm
The thickness is thin and the weight is light, which will not increase the bearing burden of bridges and pavement foundations.
4. Good waterproof performance
The material makes the pavement surface closed and has good waterproof performance.
5. Reduce vehicle noise
Absorb sound waves, reduce noise by 6-7 decibels, and reduce noise by about 30%
6. Good weather resistance
Low temperature brittleness is low, which is beneficial to use in severe cold areas. Excellent thermal aging performance and high temperature stability.Wide bonding range, suitable for a variety of materials
7. Effectively extend the service life of roads
Strong rutting resistance, reducing or preventing road surface cracking, and improving service life
Typical Applications
Road intersections, ramps, bends, mountain roads, narrow roads, deceleration areas, greenways, sidewalks, bicycle lanes, bus lanes, parks, squares, scenic spots, etc.
Technical Data Table
ITEM | VALUE | ||
Component | Part A | Part B | |
Color | Red/green/blue/etc | Dark brown liquid | |
Mixture ratio (PP5116) | A:B = 5:1 | ||
Mixture ratio(PP4116-1) | A:B = 4:1 | ||
Mixture ratio(PP5116-2) | A:B = 5:1 | ||
Mixture ratio(PP5117-2) | A:B = 5:1 | ||
Viscosity(PP5116) | 5100±500 | 200±50 | |
Viscosity(PP5116-1) | 5100±500 | 200±50 | |
Viscosity(PP5116-2) | 25000±500 | 5100±500 | |
Viscosity(PP5117-2) | 13000±500 | 200±50 | |
ITEMS | Unit | Performace after Curing | |
Solid content | % | ＞99 | |
Operating time after mixing | min | ＞30 | |
Tack free time | H | ＜1 | |
Full drying time | H | 24 | |
Bonding strength with concrete | MPa | ≥3 | |
Non-slip-dry-wet friction coefficient | / | ＞0.7 | |
Temperature resistance | °C | 80 No change (cracking, peeling, peeling) | |
Frost resistance | °C | -30 No change (cracking, peeling, peeling) | |
Acid resistance | / | No change after soaking for 15 days in 1% H2SO4 solution | |
Alkali resistance | / | Saturated Ca(OH)2 solution soaking for 15 days without change | |
Shelf life | Month | 9 | |
Note：All data above were tested under special condition (7 days after full cured).
Packing and Storage
Packing: Part A: 20kg/Bucket Part B: 4kg /Bucket
Transportation:
1. Sealed and stored in a dry, cool, and well-ventilated place away from sunlight.
2. It is suggested to be stored at 5~25 ℃, and the humidity is less than 50%RH.
3. If the temperature is higher than 40 ℃ or the humidity is more than 80%RH, the shelf life may be shorter.
- ASK FOR A SAMPLE
- SERVICE PROCESS
- CONTACT US
(1) For your own use
(2) For Wholesale or Retail
2, What or what materials you will bond or seal? What field is it？
(1) Automotive
(2) Construction
(3) Electronics
3, What's your requirements to the product?
2, You can provide Express Account for receiving samples or pay the freight to CHANGING.
3，Please provide the shipping address and the information of the consignee
the sample test data to CHANGING.
2, If it's passed, we will negotiation more detail of cooperation and move it forwarder to the trial order.
2, If it's failed, our technician need to adjust the products and start over for test.
2, Communication of details of each order.
3, Adjust the cooperation strategy according to the market situation
![WECHAT WECHAT WECHAT](javascript:Site.hoverQrCode("//24880169.s21i.faiusr.com/2/ABUIABACGAAgycbDjQYo8JvfCTDzBziuCg.jpg",this,{"tips":"请使用微信扫一扫"});){kind=link}