PU WATERPROOF COATING
Main Property
ü The emulsion is an excellent one part Polyurethane Material with excellent elastic waterproof performance.
ü Mainly be used as waterproof coating material, sealing glue, etc.
Applications
Planar Bonding and Sealing:
ü Excellent bonding, sealing and repairing of various kinds of materials, such as concrete building, wood, metal, PVC, ceramics, carbon fiber, glass, etc.
Planar Waterproofing:
ü Waterproofing and moisture proofing for kitchen, bathroom, balcony,roof and so on.
ü Anti-seepage of reservoir, water tower, water tank, swimming pool, bath,fountain pool, sewage treatment pool and drainage irrigation channel.
ü Leak-proofing and anti-corrosion for ventilated basement, underground tunnel, deep well and underground pipe and so on.
ü Bonding and moisture proofing of all kinds of tiles, marble, wood,asbestos and so on.
Technical Data
PROPERTY | STANDARD/UNITS | VALUE |
Color/state | Liquid | Black |
Density | Gr/cc | 1.30±0.5 |
Surface Drying time | Hr | 6-8 |
Curing speed | mm/ 24hrs | 3~5 |
Tensile Strength | MPa | >1.5 |
Elongation at break | % | >600 |
Solid Content | % | >90 |
Operation Temperature | °C | 5-35°C |
Service Temperature | °C | -40~+120°C |
Shelf life | month | 6 |
Note：The above data are obtained by testing the material after curing for 7 days under certain conditions
UV- RESISTANCE MS WATERPROOF COATING
Technical Data Sheet
PROPERTY | MS WATERPROOF COATING |
Color | White,Grey |
Density (g/cm³) | 1.35±0.1 |
Surface Drying Time (Min) | ＜90 |
Tensile Strength (Mpa) | ＞0.2 |
Curing Speed (mm/24h) | 3 ～5 |
Elongation at Break (%) | ＞450 |
Solid Content (%) | ＞98 |
Operation Temperature ( ℃) | 5-35 ℃ |
Service Temperature ( ℃) | -40~+120 ℃ |
Shelf Life (Month) | 9 |
Note: All data above were tested under standard condition. | |
Applications
Ø Waterproofing and moisture proofing for kitchen, bathroom, balcony, roof and so on.Ø Anti-seepage of reservoir, water tower, water tank, swimming pool, bath, fountain pool, sewage treatment pool and drainage irrigation channel.
Ø Leak-proofing and anti-corrosion for ventilated basement, underground tunnel, deep well and underground pipe and so on.
Ø Bonding and moisture proofing of all kinds of tiles, marble, wood, asbestos and so on.
UV- RESISTANCE SA WATERPROOF COATING
Technical Data Sheet
PROPERTY | SA |
Color | White,Grey |
Density (g/cm³) | 1.3±0.1 |
Surface Drying Time (Min) | ＜120 |
Tensile Strength (Mpa) | ＞0.2 |
Elongation at Break (%) | ＞150 |
Solid Content (%) | ＞99 |
Operation Temperature ( ℃) | 5-35 ℃ |
Service Temperature ( ℃) | -40~+120 ℃ |
Shelf Life (Month) | 12 |
Note: All data above were tested under standard condition. | |
Colored Two-component Polyurethane Anti-slip Coating for Road
Product Description
It is environmental two-component polyurethane adhesive material.
Colored and suitable for anti-skid pavement and colored stone permeable pavement.
After curing, it has high strength, high toughness and strong adhesion.
It can be directly bonded on the surface of asphalt, concrete, iron plate, wood board and other materials with high extensibility, good flame retardancy, strong corrosion resistance, oil stain resistance.
Key Features
1. Good anti-skid performance
It can significantly increase the dry and anti-sliding performance of the road surface in rainy days, and shorten the braking distance by more than 40%
2. Various colors are available, bright and lasting
The non-slip aggregate is made of many kinds of color and never-fading colored ceramic particles, which can ensure bright color and durable.
3. Thickness 2-5mm
The thickness is thin and the weight is light, which will not increase the bearing burden of bridges and pavement foundations.
4. Good waterproof performance
The material makes the pavement surface closed and has good waterproof performance.
5. Reduce vehicle noise
Absorb sound waves, reduce noise by 6-7 decibels, and reduce noise by about 30%
6. Good weather resistance
Low temperature brittleness is low, which is beneficial to use in severe cold areas. Excellent thermal aging performance and high temperature stability.Wide bonding range, suitable for a variety of materials
7. Effectively extend the service life of roads
Strong rutting resistance, reducing or preventing road surface cracking, and improving service life
Typical Applications
Road intersections, ramps, bends, mountain roads, narrow roads, deceleration areas, greenways, sidewalks, bicycle lanes, bus lanes, parks, squares, scenic spots, etc.
Technical Data Table
ITEM | VALUE | ||
Component | Part A | Part B | |
Color | Red/green/blue/etc | Dark brown liquid | |
Mixture ratio (PP5116) | A:B = 5:1 | ||
Mixture ratio(PP4116-1) | A:B = 4:1 | ||
Mixture ratio(PP5116-2) | A:B = 5:1 | ||
Mixture ratio(PP5117-2) | A:B = 5:1 | ||
Viscosity(PP5116) | 5100±500 | 200±50 | |
Viscosity(PP5116-1) | 5100±500 | 200±50 | |
Viscosity(PP5116-2) | 25000±500 | 5100±500 | |
Viscosity(PP5117-2) | 13000±500 | 200±50 | |
ITEMS | Unit | Performace after Curing | |
Solid content | % | ＞99 | |
Operating time after mixing | min | ＞30 | |
Tack free time | H | ＜1 | |
Full drying time | H | 24 | |
Bonding strength with concrete | MPa | ≥3 | |
Non-slip-dry-wet friction coefficient | / | ＞0.7 | |
Temperature resistance | °C | 80 No change (cracking, peeling, peeling) | |
Frost resistance | °C | -30 No change (cracking, peeling, peeling) | |
Acid resistance | / | No change after soaking for 15 days in 1% H2SO4 solution | |
Alkali resistance | / | Saturated Ca(OH)2 solution soaking for 15 days without change | |
Shelf life | Month | 9 | |
Note：All data above were tested under special condition (7 days after full cured).
Packing and Storage
Packing: Part A: 20kg/Bucket Part B: 4kg /Bucket
Transportation:
1. Sealed and stored in a dry, cool, and well-ventilated place away from sunlight.
2. It is suggested to be stored at 5~25 ℃, and the humidity is less than 50%RH.
3. If the temperature is higher than 40 ℃ or the humidity is more than 80%RH, the shelf life may be shorter.
- ASK FOR A SAMPLE
- SERVICE PROCESS
- CONTACT US
(1) For your own use
(2) For Wholesale or Retail
2, What or what materials you will bond or seal? What field is it？
(1) Automotive
(2) Construction
(3) Electronics
3, What's your requirements to the product?
2, You can provide Express Account for receiving samples or pay the freight to CHANGING.
3，Please provide the shipping address and the information of the consignee
the sample test data to CHANGING.
2, If it's passed, we will negotiation more detail of cooperation and move it forwarder to the trial order.
2, If it's failed, our technician need to adjust the products and start over for test.
2, Communication of details of each order.
3, Adjust the cooperation strategy according to the market situation
![WECHAT WECHAT WECHAT](javascript:Site.hoverQrCode("//24880169.s21i.faiusr.com/2/ABUIABACGAAgycbDjQYo8JvfCTDzBziuCg.jpg",this,{"tips":"请使用微信扫一扫"});){kind=link}